CCD Automatic Punching Machine

1. Parameters

1. Punching Diameter: Φ1–Φ5mm (Standard Configuration); customizable up to Φ30mm 

2. Display: Standard 8-inch Touchscreen 

3. Recognition Circle Diameter: Φ1–Φ4mm (supports "Cross-circle" Mark) 

4. Air Pressure: 0.4–0.7MPa 

5. Maximum Processing Panel Size: 600×600mm 

6. Processing Error: <0.015mm 

7. Punching Speed: ~0.5 seconds/hole 

9. Power Consumption: 0.4kW; Voltage: AC200V–240V 

10. Key components such as filter regulator, cylinders, solenoid valves (Japan SMC/CKD) and guide rails are all imported to ensure long service life 

2. Application Scope

Positioning hole punching for flexible boards, film sheets, PET/PC/PVC films, polyester, photographic films, diazo films, membrane switches (buttons), aluminum plates, metals, etc. 

Widely used in positioning hole processing for electronics, nameplates, signs, packaging, printing and other industries. 

3. Features

1. Windows XP operating system with human-machine interface (HMI), simple and intuitive 

2. Touch function: Set working modes directly on the touchscreen 

3. Intelligent Recognition: Automatically recognizes circular patterns on various materials; enables automatic punching for special printed materials, reflective/mirror-like materials, cross-circles, faintly printed or incomplete circles (including semicircles) without precision loss, greatly improving production efficiency 

4. During operation, punching status can be viewed directly on the 8-inch screen or at the punching position 

5. A presser foot on the machine flattens the film to be punched for higher precision; a suction plate is optional for thinner materials 

6. Fast moving speed, low noise, high precision 

7. Customized settings available; software upgradeable, with professional technical support provided